ТЕРМОМЕТРИЧНІ МЕТОДИ ДОСЛІДЖЕННЯ СТАНУ СПРЕСОВАНОСТІ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА

Ie. O. Zaitsev; M. V. Panchyk

doi:10.15407/publishing2021.59.086

No. 59 (2021), PROCEEDINGS OF THE SCIENTIFIC AND TECHNICAL CONFERENCE OF YOUNG SCIENTISTS

No. 59 (2021)

THERMOMETRIC METHODS CONTROL OF COMPRESSION STATOR CORE STATE OF POWERFUL TURBOGENERATORS

PROCEEDINGS OF THE SCIENTIFIC AND TECHNICAL CONFERENCE OF YOUNG SCIENTISTS

https://doi.org/10.15407/publishing2021.59.086

Published 2021-09-20

Ie. O. Zaitsev⁺⁻
M. V. Panchyk⁺⁻

Ie. O. Zaitsev

Institute of Electrodynamics of the National Academy of Sciences of Ukraine, pr. Peremohy, 56, Kyiv, 03057, Ukraine

https://orcid.org/0000-0003-3303-471X

M. V. Panchyk

Institute of Electrodynamics of the National Academy of Sciences of Ukraine, pr. Peremohy, 56, Kyiv, 03057, Ukraine

https://orcid.org/0000-0003-3633-2632

Article_12 PDF (Українська)

Keywords

turbogenerator
stator
core
assembly
pressing
compression
defects
control

How to Cite

Зайцев, Є. О. ., and М. . Панчик. “THERMOMETRIC METHODS CONTROL OF COMPRESSION STATOR CORE STATE OF POWERFUL TURBOGENERATORS”. Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine, no. 59, Sept. 2021, p. 086, doi:10.15407/publishing2021.59.086.

Abstract

The article is devoted to the analysis of thermometric methods of control and diagnosis of the state of compression of the stator core of the turbogenerator (TG), which have found the greatest application. It is shown that ensuring effective and high-quality control of powerful electric machines, especially power plant generators, today is an integral part of ensuring the reliability and trouble-free operation of their work. As a result of the analysis, it is shown that ensuring high reliability of operation of the generating equipment is practically impossible without their equipping with modern means of control capable to work in real-time. Bibl. 34, fig. 4.

https://doi.org/10.15407/publishing2021.59.086

Article_12 PDF (Українська)

References

Analysis of foreign practice of introduction of automated control systems of technological processes in electric power industry. URL: https://ua.energy/wp-content/uploads/2018/01/2.-SMART-GRID.pdf (accessed: 07.06.2021). (Ukr)

Schneider Electric. Electricity 4.0 for smart energy. URL: https://www.se.com/ww/en/work/campaign/electricity-4-0/sustainable-energy-generation.jsp. (accessed: 17.06.2021)

ENTSO-E. Research, Development & Innovation Roadmap URL: https://eepublicdownloads.entsoe.eu/clean-documents/Publications/RDC%20publications/entso-e-rdi_roadmap-2020-2030.pdf (accessed: 21.06.2021)

Csaba G. Generator diagnostics from failure modes to risk for forced outage. URL: https://irispower.com/wp-content (accessed: 21.06.2021).

Rubanenko O.O., Yanovich V.P., Gunko I.O. Investigation of the causes of damage to synchronous generators. Visnyk Khmelnytskoho natsionalnoho universytetu. 2019. No 5 (277). Pp. 176–179. URL: http://journals.khnu.km.ua/vestnik/wp-content/uploads/2021/01/30-8.pdf (accessed: 01.07.2021) (Ukr)

Kobzar K.O., Tretyak O.V., Shut O.Y., Polienko V.R., Gakal P.G., Pyatnytska E.S. Development and imple-mentation of promising methods of calculation and modeling in the design and operation of powerful turbogen-erators and hydrogenerators for TPPs, NPPs, HPPs, PSPs. Visnyk Natsionalnoho tekhnichnoho universytetu «KhPI». Seriia: Elektrychni mashyny ta elektromekhanichne peretvorennia enerhii. 2018. No 5 (1281). Pp. 38–45. (Ukr)

Tretyak O.V. Strength of high-power turbogenerators and hydrogenerators: author's abstract of Dr. tech. sci. diss.: 05.02.09. Institute of Mechanical Engineering Problems A.M. Podgorny NAS of Ukraine. Kharkiv. 2020. 48 p. (Ukr)

Levitsky A.S., Zaitsev E.A., Panchik M.V. Inspection of the stator core of the turbine generator during assem-bly. Modern methods and devices for quality control and diagnostics of the state of objects: Collection of ab-stracts of the 7th international scientific and technical conference, September 24–25, 2020, Mogilev, Republic of Belarus. Mogilev: Belorus.-Ros. un-t, 2020. Pp. 99–105. URI: http://e.biblio.bru.by/handle/1212121212/12991 (accessed: 21.06.2021). (Rus)

Zaitsev E.O, Panchyk M.V. Physical processes and their influence on the development of defects in the stator core of powerful generators. Science and Education a New Dimension. Natural and Technical Sciences. 2020. No 224. Pp. 81–84. DOI: https://doi.org/10.31174/SEND-NT2020-224VIII27-20 . (Ukr)

Bertenshaw D.R., Smith A.C., Ho C.W., Chan T., Sasic M. Detection of stator core faults in large electrical ma-chines. Electric Power Applications. 2012, Vol. 6, No 6. Pp. 295–301. DOI: https://doi.org/10.1049/iet-epa.2011.0125

Generator diagnostics From failure modes to risk for forced outage. URL: https://irispower.com/wp-content/uploads/2018/06/Generator-diagnostics-From-failure-modes-to-risk-forced-outage.pdf (accessed: 01.07.2021)

Levitsky A.S., Fedorenko G.M. Sensors for measuring the compression force of the stator core of hydro and turbogenerators. Hydroenerhetyka Ukrainy. 2009. No 4. Pp. 35–39. (Ukr)

Zaitsev Ie.O., Levytskyi A.S., Kromplyas B.A. Capacitive distance sensor with coplanar electrodes for large turbogenerator core clamping system. Electronics and Nanotechnology (ELNANO): Proceedings of the 2019 IEEE International Conference, April 16–18, 2019. Kiev, Ukraine. Pp. 644–647. DOI: https://doi.org/10.1109/ELNANO.2019.8783916

Sharov Yu.V., Binko G.F., Belyakov V.V., Vinitskiy Yu.D., Golodnova O.S., Kupchikov T.V., Fedotov M.V., Astanin A.A., Tarasov V M., Milyaev R.G., Pichugin D.E., Shumov P.V. Digitalization of monitoring the cur-rent state and predictive diagnostics of turbine generators at power plants. Energiya edinoj seti. 2020. No 6 (49). Pp. 1830. URL: https://xn-----glcfccctdci4bhow0as6psb.xn--p1ai/images/6-49/006_SHAROV_NTC_EES_6_49.pdf (accessed: 01.07.2021) (Rus)

Čepon G., Pirnat M., Boltežar M. An experimental and numerical identification of laminated structure dynam-ics. Noise and Vibration Engineering (ISMA2012) and on Uncertainty in Structural Dynamics (USD2012): Pro-ceeding of International Conference, 1719 September, 2012. Vol. 3. Pp. 3153–3165.

Use of fiber optic sensor techniques for monitoring and diagnostics of large AC generators: pat. 20120026482 A1 United States Patent: Int. Cl. G01J5/48; Appl. No. US 13/065,842; Publ. date Feb. 02. 2012.

Harbord J. P. Some tests on modern high-speed turbo alternators. IEE Students' Quarterly Journal. 1953. Vol. 24, No 93. Pp. 3–9. DOI: https://doi.org/10.1049/sqj.1953.0043

Tomlinson H. R. Interlaminar insulation test for synchronous machine stators. Transactions of the American In-stitute of Electrical Engineers. Part III: Power Apparatus and Systems. 1952. Vol. 71(1). Pp. 676–677. DOI: https://doi.org/10.1109/AIEEPAS.1952.4498526

Shelton J.W., Reichman B.M. A comparative analysis of turbogenerator core inspection techniques. Proceed-ings of the American Power Conference. 1985. Pp. 643–650.

Lodge I. Flux testing of generator stator cores. CEGB, SSD/NE/R293, 1975.

IEEE Std 56-1977. Guide for insulation maintenance of large alternating-current rotating machinery (10 000 kVA and Larger), IEEE, USA, 1991.

IEEE Std 62.2-2004. Guide for diagnostic field testing of electric power apparatus. IEEE, USA, 2005.

SOU-N EE 20.302: 2007 Standards for testing electrical equipment. 2020. 243 p. URL: https://docs.dtkt.ua/download/pdf/1225.943.1 (accessed: 01.07.2021) (Ukr)

Bertenshaw D.R. Stator core interlamination faults and their detection by electromagnetic means. School of Electrical and Electronic Engineering. 2014. 214 p.

Levitsky A.S., Zaitsev E.A., Kobzar K.A. Measuring the travel of the Belleville springs in the power accumula-tors of the stator core of a turbine generator using a capacitive sensor. Pribory i metody izmerenij. 2018. Vol. 9(2). Pp. 121–129. DOI: https://doi.org/10.21122/2220-9506-2018-9-2-121-129 . (Rus)

Novik A.I., Levitsky A.S., Zaitsev E.A. Capacitive pulling force sensor with compensation of errors from the skew of the electrodes. Pratsi Institutu Elektrodynamiki NAN Ukrainy. 2016. Vol. 48. Pp. 126–132. DOI: https://doi.org/10.15407/publishing2017.48.126 (Rus)

Levitsky A.S., Zaitsev E.A., Smirnova A.M. Elastic element of the force transducer in the clamping prisms of the stator core of a powerful turbogenerator. Pratsi Institutu Elektrodynamiki NAN Ukrainy. 2018. Vol. 49. Pp. 32–39. DOI: https://doi.org/10.15407/publishing2018.49.032 (Ukr)

Golodnova O.S. Automation of the determination of the temperature characteristics of the generator for the pur-poses of diagnostics during operation. Vesti v elektroenergetike. 2015. No 2. Pp. 20–24. (Rus)

Kensitsky O.G., Klyuchnikov A.A., Fedorenko G.M. Safety, reliability and efficiency of operation of electrical and electric power equipment of NPP units. Chernobyl. 2009. 240 p. (Rus)

Gren Y.V., Roman V.I. Investigation of ultrasonic pulse propagation in a package of sheets of electrical steel. Visnyk Natsionalnoho universytetu Lvivska politekhnika. No 707: Elektroenerhetychni ta elektromekhanichni systemy. 2011. Pp. 36–41. (Ukr)

Chelomey V.N. Vibrations in technology. Moscow: Mashinostroenie, 1981. 1981. 496 p. (Rus)

IEEE Std 1129-2014. IEEE Guide for online monitoring of large synchronous generators (10 MVA and above). IEEE, USA, 2014.

Kuznetsov D.V., Maslov V.V., Netseevsky A.B. Technical diagnostics of powerful generators. Energiya edinoj seti. No 3 (14). 2014. Pp. 50–59. (Rus)

Sharov Yu.V., Belyakov V.V., Vinitskiy Yu.D., Golodnova O.S. The concept of online diagnostics and moni-toring of turbine generators using computer technology in automated control systems. Energetic. 2019. No 6. Pp. 15−22. (Rus)