Keywords
cross-linked polyethylene (XLPE) insulation
insulation eccentricity
insulation protrusion
semiconducting screens
electric field
computer modeling
How to Cite
Abstract
The study of two-dimensional electric field in cross-linked polyethylene (XLPE) insulation with eccentricity and a protrusion of the insulation into the internal semiconducting screen of high-voltage cable is carried out by computer modeling. The non-uniformity of the distribution and the regularities of the change in the level of the electric field depending on the considered defects are analyzed. The dependence of the maximum electric field strength on insulation concentricity (within the range of 0–0.5) is presented. The need to prevent the eccentricity of the XLPE insulation system and its defects in the production process of power cables is grounded to ensure their high quality and further reliable operation. Ref. 15, fig. 6.
References
High Voltage Cable Market. https://straitsresearch.com/report/high-voltage-cable-market
Hernandez-Mejia J.C., Elledge S., Riley C., Ramirez D. Cable quality assurance program. NEETRAC (National Electric Energy Testing, Research and Applications Center), IEEE PES ICC Spring 2023, Denver CO, May 2023, 9 p. https://bpb-us-w2.wpmucdn.com/sites.gatech.edu/dist/6/3800/files/2023/08/CableQA_ICC_Spring2023.pdf
National standard of Ukraine. Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV). Test methods and requirements. (ІЕС 62067:2011, IDT) DSTU ІЕС 62067:2014. https://online.budstandart.com/ua/catalog/doc-page?id_doc=60880
IEC standard IEC 62067:2022. https://webstore.iec.ch/publication/66951 https://webstore.iec.ch/p-preview/info_iec62067%7Bed2.0.RLV%7Den.pdf
National standard of Ukraine (DSTU) IEC 60840:2021 .Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV). Test methods and requirements. https://online.budstandart.com/ua/catalog/doc-page.html?id_doc=95896
IEC standard IEC 60840:2020 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements. https://webstore.iec.ch/publication/63025
Humphreys-JONES G. Ultrasonic extrusion quality monitoring of multilayer HV cables during roduction – "a new vision in cable monitoring". 9th International Conference on Insulated Power Cables, Jicable'15, Versailles 21–25 June, 2015, paper E8.5, 6 p. http://www.jicable.org/TOUT_JICABLE_FIRST_PAGE/2015/2015-E8-5_page1.pdf
Guiding technical material on the construction, testing and operation of cable lines using cables with cross-linked polyethylene insulation for voltage 64/110 kV. Kharkov: Maidan, 2007, 62 p.
Wang L., Wang C., Cheng J., Zhang T., Wang H. Mathematical model establishment for cable eccentricity online detection system based on X-ray. Proceedings of the 29th Chinese Control And Decision Conference (CCDC), 28-30 May 2017, Chongqing, China p. 5957–5960. DOI: https://doi.org/10.1109/CCDC.2017.7978236
Wen, J.; Zhao, H. On line measurement of cable insulation wall thickness and eccentricity using eddy current. Proceedings of the 7th International Conference on Properties and Applications of Dielectric Materials, 1–5 June 2003; Nagoya, Japan, p. 816–819.
Li Н., Wentao Jia W. Analysis of cable eccentric diameter measurement based on the production line. Journal of Physics: Conference Series 2587(1):012093. ICAMMT-2023, 6 p. – doi: 10.1088/1742-6596/2587/1/012093 https://www.researchgate.net/publication/373885523_Analysis_of_cable_eccentric_diameter_measurement_based_on_the_production_line
Zhang X., Yin H. A monocular vision-based framework for power cable cross-section measurement. Energies – www.mdpi.com/journal/energies, 2019, vol. 12, 26 p. DOI: https://doi.org/10.3390/en12153034
Comsol multiphysics modeling and simulation software. http://www.comsol.com/
Shcherba A.A., Podoltsev O.D., Kucheriava I.M. Electric field of semiconducting screen in power cable with polymer insulation taking into account structural inhomogeneities. Tekhnichna elektrodynamika. 2024. No. 5. DOI: https://doi.org/10.15407/techned2024.05.003. (Ukr)
Berger L.I. Dielectric strength of insulating materials. in Handbook of Chemistry and Physics. Ed. by W.M. Haynes, D.R. Lide, T.J. Bruno. CRC Press: Taylor & Francis Group, 95-th edition, 2014–2015, p. 15-46–15-50. https://chemistry.mdma.ch/hiveboard/rhodium/pdf/chemical-data/diel_strength.pdf https://edisciplinas.usp.br/pluginfile.php/4557662/mod_resource/content/1/CRC%20Handbook%20of%20Chemistry%20and%20Physics%2095th%20Edition.pdf
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2024 I.M. Kucheriava