Keywords
stator core
tightening prism
effort
cylindrical elastic sensor element
error
measurements
conversion function
How to Cite
Abstract
Investigated cylindrical elastic sensor element (ESE) of the force primary converter for the powerful turbogenerators stator tightening prisms core. The method of calculation of tubular ESE is proposed, which allows the design effort design gauges from load changes over a wide range. Analytical relations for calculating the dimensions of the ESE element are determined. Conversion function "force - relative longitudinal strain" with the changing cross sectional area of the element in accordance with Poisson's ratio is obtained. The relative error caused by the nonlinearity of the conversion function is calculated. The analytical dependencies of the information signal on the force in the elastic element for strain-resistive, capacitive and fiber-optic meters are established. References 12, figures 7.
References
Guide to the Measurement of Force. The Institute of Measurement and Control, London. – Originally published 1998. Reviewed and re-issued 2013. 46 p. Mode of access: http://www.npl.co.uk/upload/pdf/forceguide.pdf
Bauman E. Measurement of forces by electrical methods. Moscow: Mir, 1978. - 430 p.
Shtorgin A.V. Scientific and technical measures to reduce the damage of stators of powerful turbogenerators caused by vibration in end zones: Diss. ... candidate technical of science Kyiv, 2015. 161 p.
Dan Mihai Stefanescu. Handbook of Force Transducers: Principles and Components. - Berlin: Springer, 2011 - 612 p. Access mode: https://books.google.com.ua/books?id=RjzO10gmXZYC&pg=PR21&lp.
Karl Hoffmann. An Introduction to Stress Analysis and Transducer Design using Strain Gauges. HBM Test and Measuremen. 2012. 257 p. Режим доступу: http://www.kkgroup.ru/help/Strain_Gauge_Measurements_Book _2012_01.pdf.
Liu M., Zhou Z., Tao X., Tan Y. A dynamometer design and analysis for measurement the cutting forces on turning based on optical fiber Bragg Grating sensor. Prociding of the 10th World Congress on Intelligent Control and Automation. July 6-8, 2012, Beiling, Chine. P. 4287–4290.
United States Patent No. US 20120026482 A1. Int. Cl. G01J5/48. Use of fiber optic sensor techniques for monitoring and diagnostics of large AC generators. George Franklin Dailey (US) – Appl. No. US 13/065,842; Pub. date Feb. 02, 2012.
Levitsky A.S., Kobzar K.O., Zaitsev E.O. Fiber-optic force meters in tension prisms of turbogenerators based on Bragg gratings. Hydropower of Ukraine. 2017. No. 3-4. P. 22–25.
Levitsky A.S., Fedorenko H.M. Sensors for measuring the pressing force of the stator cores of hydro- and turbogenerators. Hydropower of Ukraine. 2009. No. 4. P. 35–39.
Pykulsky V.A., Chistykov A.A., Lifshits A.L. Investigation of the density distribution of the pressing of the active steel of the turbogenerator stator. Electrical engineering. 1990. No. 6. Pp. 9–13.
Fedorenko H.M., But A.A., Kuzmin V.V. et al. Methodology and measuring tools for determining pressing forces in the stator core of a powerful turbogenerator. Technical electrodynamics. 1991. No. 4. P. 64–69.
Felikson E. I. Elastic elements of devices. Moscow: Mashinostroenie, 1977. 311 p.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2018 A.S. Levytskyi, I.O. Zaitsev, A.M. Smyrnova