Keywords
stator core
tightening prism
effort
capacity sensor
out-of-parallelism of electrodes
error
How to Cite
Abstract
This paper present the method of considerable reduction of measuring error of efforts in the turbogenerator tightening prisms with the use of resilient element and capacity sensor with variable gap is considered. The error, which was as result of arising up from out-of-parallelism of flat sensor circular electrodes, is analyzed. Correlations of sizes external and internal electrodes at that basic constituent of error of transformation "microdisplacement – reciprocal of electric capacity" transforms into an infinitesimal are found. The ratio of size of the external and internal ring electrodes at that basic constituent of error of transformation "microdisplacement – reciprocal of electric capacity "transforms into an infinitesimal are found. The use of concept "Coefficient of defect" for simplification of determination and size estimation out-of-parallelism of electrodes regardless of their geometrical sizes is proposed. Efficiency of the proposed method of correction depending on the coefficient of circular electrodes defect is analysed. It is shown that the relative error of measuring at the large angles of defect diminishes in several times, and at small - in several hundred one times. Refences 7, figure, table.
References
Grinevich F.B., Lezhoev R.S. Compensation of the error caused by the non-parallelity of the electrodes of the capacitive sensor. Tekhnichna Elektrodynamika. 1988. No 5. Pp. 68–71.
Levitsky A.S., Fedorenko G.M., Gruboi O.P. Monitoring the state of powerful hydro- and turbogenerators with the help of capacitive meters of the parameters of mechanical defects. Kyiv: Institute of Electrodynamics of NAS of Ukraine, 2011. 242 p.
Titko O.I., Mystetskyi V.A. Mathematical model, methods and results of calculating the forces in the tie prisms of the stator core of the turbogenerator in the presence of defects based on the method of three moments. Pratsi Instytutu Elektrodynamiky NANU. 2014. Issue 39. Pp. 38–44.
Fomin B.P., Tsikhanovich B.G., Viro G.M. Technology of large-scale electrical engineering. Vol.1: Turbo-generators. L.: Energoizdat, 1981. 392 p.
5. Shtorgin A.V. Scientific and technical measures to reduce the damage to stators of powerful turbogener-ators caused by vibration in the end zones: Dis. ... cand. techn. Ph.D.: 05.11.05 Electrical machines and apparatus. К., 2015. 161 p.
Heerens W.C. Multi-terminal capacitor sensors. Journal of Physics E. Scientific Instruments. Vol. 15. 1982. Pp. 137–141.
Polyanin A.D., Manzhirov A.V. Handbook of mathematics for engineers and scientists. Boca Raton, FL: Taylor & Francis Group, LLC. 2007. 1543. Avaible at: http://izt.ciens.ucv.ve/ecologia/Archivos/References-I-math/books-math/Math/Polyanin_Manzhirov-Handbook_of_Mathematics_for_Engineers_and_Scientists.pdf (accessed 24.05.2017).
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2017 A.S. Levytskyi, A.I. Novik, Ye.O. Zaitsev