Keywords
asynchronous generator
capacitor, valve, valve-capacitor excitation
half-bridge and high-frequency inverters
pulse width regulator
mathematical model
computational and experimental studies
How to Cite
Abstract
The article is aimed at generalizing the results of the study of asynchronous generators (AG) of autonomous welding arc power sources (AWPS) obtained in the Department of Electromechanical Systems of the Institute of Electrodynamics of the NASU. The proposed classification of AG of autonomous welding systems is considered, mathematical models are developed, the results of computational and experimental studies of such systems with AG with capacitor excitation and an uncontrolled rectifier, in the DC circuit of which high-frequency inverters, pulse-width regulators or half-bridge inverters are connected, as well as generators with valve and valve-capacitor excitation. The design features and experimental samples of welding arc power sources with AG are considered. The directions of further research are determined. Ref. 42, fig. 5.
References
Holoshubov V.I. Welding power sources: tutorial. K.: Aristeus. 2005. 446 p.
Welders/Generators for engine-driven welders with SMAW welding process. URL: https://www.sogaenergyteam.com/wp-content/uploads/2015/12/WELDERS-RANGE-SINCRO.pdf (accessed 11.11.2024)
Boussiala, Boubakr & Nezli, L. & Mahmoudi, Mohand & Deboucha, Abdelhakim. (2018). Novel welding machine based on small PMSG wind turbine. Journal of Renewable and Sustainable Energy. URL: https://doi.org/10. 053304. 10.1063/1.5042609. (accessed 11.11.2024)
Richard Beeson, Stephen Li, Alan Smith. Engine driven welding power supply with inverter auxiliary power. US Patent US6469401B2, 2002.
Welding machine with Honda engine petrol-driven Powerflex Brand. URL: https://jashsupplies.com/product/welding-machine-with-honda-engine-petrol-driven-powerflex-brand/ (accessed 11.11.2024)
R. K. Kumawat, S. Chourasiya, S. Agrawal and D. K. Paliwalia, "Self Excited Induction Generator: A Review," International Advanced Research Journal in Science, Engineering and Technology (IARJSET), Vol. 2, No. 1, Pp. 37-42, 2015.
Varshney L, Vardhan AS, Vardhan AS, Kumar S, Saket RK, Sanjeevikumar P. Performance characteristics and reliability assessment of self-excited induction generator for wind power generation. IET Renew. Power Gener. 2021; 15: 1927–1942. https://doi.org/10.1049/rpg2.12116. (accessed 11.11.2024)
B. M. Krishna V. and V. Sandeep, "Experimental Study on Different Modes of Self Excited Induction Generator Operation," 2020 2nd PhD Colloquium on Ethically Driven Innovation and Technology for Society (PhD EDITS), Bangalore, India, 2020, Pp. 1-2, doi: 10.1109/PhDEDITS51180.2020.9315310.
P. Nakorn, P. Machot, V. Kinnares and C. Manop, "Study of Three-phase Self-excited Induction Generator Operating as Single-phase Induction Generator Supplying Non-linear Load," 2021 18th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), Chiang Mai, Thailand, 2021, Pp. 806-809, doi: 10.1109/ECTI-CON51831.2021.9454845.
S. P. Burud, T. B. Patil, U. S. Mirje, S. S. More, G. S. Mane and S. S. Mulik, "Requirement of Minimum Capacitor to Build-Up and Maintain the Voltage in Self Excited Induction Generator," 2018 International Conference On Advances in Communication and Computing Technology (ICACCT), Sangamner, India, 2018, Pp. 627-632, doi: 10.1109/ICACCT.2018.8529428.
A. A. Al-Manfi, W. A. Mohamed and E. F. Elsalhin, "Voltage Control of Stand-alone Single Phase Self Excited Induction Generator for Variable Speed Wind Turbine Using Bang Bang-PWM Controller," 2022 IEEE 2nd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), Sabratha, Libya, 2022, Pp. 749-754, doi: 10.1109/MI-STA54861.2022.9837503.
D. Elshaibani et al., "Simulation and practical implementation of a SEIG used in wind energy systems with rectified output voltage," 2017 4th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS), Salmabad, Bahrain, 2017, Pp. 1-6, doi: 10.1109/ICETAS.2017.8277880.
W. E. Vanço, F. B. Silva, C. M. R. De Oliveira, J. R. B. A. Monteiro and J. M. M. De Oliveira, "A Proposal of Expansion and Implementation in Isolated Generation Systems Using Self-Excited Induction Generator With Synchronous Generator," in IEEE Access, vol. 7, Pp. 117188-117195, 2019, doi: 10.1109/ACCESS.2019.2937229.
Noriyuki Kimura, Toshimitsu Morizane, Katsunori Taniguchi and Tomoyuki Hamada, "Inverter excited induction machine for high performance wind power generation system," 2007 European Conference on Power Electronics and Applications, Aalborg, Denmark, 2007, Pp. 1-9, doi: 10.1109/EPE.2007.4417481.
M. Rezkallah, A. Chandra, B. Singh and M. El Kahel, "Vector control of squirrel-cage induction generator for stand-alone wind power generation," IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society, Montreal, QC, Canada, 2012, Pp. 1166-1171, doi: 10.1109/IECON.2012.6388607.
S. Lee and M. Sim, "A study on induction generator control methods for commercial vehicle based on slip- and vector control," 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 2017, Pp. 1-5, doi: 10.1109/ICEMS.2017.8056248.
S. Peresada, S. Kovbasa, M. Zhelinskyi and A. Duchenko, "Speed sensorless direct field oriented control of induction generator," 2017 IEEE First Ukraine Conference on Electrical and Computer Engineering (UKRCON), Kyiv, UKraine, 2017, Pp. 548-553, doi: 10.1109/UKRCON.2017.8100304.
S. Yukhalang, T. Sopapirm and V. Kinnares, "Three-phase Self-Excited Induction Generator Operating as Single-phase Induction Generator using Static VAR Compensator," 2023 20th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), Nakhon Phanom, Thailand, 2023, Pp. 1-7, doi: 10.1109/ECTI-CON58255.2023.10153314.
N. Singla and V. Pahwa, "Dynamic performance of three phase self excited induction generator using STATCOM for improved voltage regulation," 2015 2nd International Conference on Recent Advances in Engineering & Computational Sciences (RAECS), Chandigarh, India, 2015, Pp. 1-6, doi: 10.1109/RAECS.2015.7453418
Satpathy, A.S., Kastha, D. and Kishore, K. (2019), Control of a STATCOM-assisted self-excited induction generator-based WECS feeding non-linear three-phase and single-phase loads. IET Power Electronics, 12: Pp. 829-839. https://doi.org/10.1049/iet-pel.2018.5482
Ion, Catalin Petrea, and Ioan Serban. 2019. "Seamless Integration of an Autonomous Induction Generator System into an Inverter-Based Microgrid" Energies 12, No. 4: 638. https://doi.org/10.3390/en12040638
Mazurenko L.I., Lisnyk V.Ya., Dynnik L.M., Dzhura O.V. Mathematical model and control algorithm of an asynchronous welding generator. Tekhnichna Electrodynamika. 2008. No. 2. Pp. 22-26. (Ukr)
Lishchenko A.I., Lesnik V.A., Mazurenko L.I. Autonomous power sources for welding arc with asynchronous generators. Tekhnichna Electrodynamika. 1999. No. 6. Pp. 51-55. (Rus)
Mazurenko L.I., Romanenko V.I. An asynchronous generator with valve excitation as a source of life for the welding arc. Tekhnichna Electrodynamika. 2010. No. 6. Pp. 35-39. (Ukr)
Mazurenko L.I., Dzhura A.V., Dynnik L.N., Soloviev V.V. Single-post autonomous welding complex. Part 1: Mathematical model of the power section. News of Kremenchuk State Polytechnical University. 2009. Issue. 3(56). Part 1. Pp. 145-149. (Rus)
L.I. Mazurenko, O.V. Dzhura, A.V. Kotsiuruba, M.O Shykhnenko. An induction generator based electrical generator set for dual DC ARC welding and AC electric power supply. IEEE 6th International Conference on Modern Electrical and Energy Systems (MEES). Kremenchuk, Ukraine.18-21 September 2024.
Mazurenko L.I., Romanenko V.I. Asynchronous valve generator in the core of a cerated dzherel struma. Newsletter of the National Technical University "KhPI". Kharkiv, Ukraine. 2010. No. 28. Pp. 66-67. (Ukr)
L.I. Mazurenko, V.I. Romanenko, Method of controlling an autonomous asynchronous generator with a squirrel-cage rotor. Patent for utility model UA No. 51704, 2010. (Ukr)
Mazurenko L.I., Dzhura O.V., Romanenko V.I., Bilyk O.A. Computational study of asynchronous generators with two stator windings as part of welding complexes with pulse-width current regulators. Tekhnichna Electrodynamika. 2012. No. 3. Pp. 83-84. (Ukr)
Mazurenko L.I., Lishchenko A.I. Asynchronous generators with valve and valve-capacitive excitation for autonomous power plants. K.: Nauk. dumka, 2011. 271 p. (Rus)
Mazurenko L.I., Dzhura O.V., Dynnik L.M., Solovyov V.V. Modeling of asynchronous generators with two stator windings when operating on a rectifier with RC-load. Pratsi Instytutu electrodynamiky Nationalnoi Academii Nauk Ukrainy. Kyiv, 2010. Issue 25. Pp. 81-88. (Ukr)
"To develop the foundations of the theory, principles of construction and conduct a comprehensive study of multifunctional energy-efficient asynchronous generators with valve-capacitive excitation and microprocessor control for autonomous welding multisystems" ("ASINGEN-2"). Final report on the research. Institute of Electrodynamics of the National Academy of Sciences of Ukraine. No. DR 0107U002515. 2010. 316 p. (Ukr)
Mazurenko L.I., Dzhura A.V., Dynnik L.N. Single-station autonomous welding complex. Part 2: Control algorithm, simulation results. Newsletter of the Kremenchutsk State Polytechnic University. 2009. No 4 (57). Part 2. Pp. 128-132. (Rus)
"Conduct research into electromagnetic processes and develop principles for modeling autonomous power sources for a welding arc based on asynchronous generators with valve converters in stator circuits" ("ASINGEN"). Final report on research. Institute of Electrodynamics of the National Academy of Sciences of Ukraine. No. GR 0102U007350. – 2006. (Rus)
Mazurenko L.I., Romanenko V.I. A mathematical model of an asynchronous generator with valve excitation and a vicoristan method of adaptation. Tekhnichna Electrodynamika. 2010. No. 4. Pp. 19-24. (Ukr)
Lesnik V.A., Mazurenko L.I. Multi-station welding arc power sources based on asynchronous generators. Tekhnichna Electrodynamika. Tem. issue of "Problems of daily electrical mechanics". 2000. Part 2. Pp. 76-81. (Rus)
Mazurenko L.I., Romanenko V.I., Dzhura O.V. Investigation of static characteristics of an autonomous asynchronous welding generator with valve excitation using an L-shaped equivalent circuit. Tekhnichna Electrodynamika . 2012. No. 2. Pp. 75-76. (Ukr)
Mazurenko L.I., Romanenko V.I., Dzhura O.V. Calculation of the operating characteristics of an autonomous welding generator with valve excitation using the equivalent circuit. Pratsi Instytutu electrodynamiky Nationalnoi Academii Nauk Ukrainy. Kyiv, 2011. Issue 28. Pp. 64-70. (Ukr)
Mazurenko L.I., Romanenko V.I., Dzhura O.V. Transfer function of an autonomous asynchronous generator with valve excitation. Electromechanical and energy-saving systems. Thematic issue "Problems of automated electric drive. Theory and practice" of the scientific and production journal - Kremenchuk. 2012. Issue 3(19). Pp. 412-415. (Ukr)
Mazurenko L.I., Lisnyk V.Ya. Autonomous power sources for welding arcs based on an asynchronous generator. Pratsi Instytutu electrodynamiky Nationalnoi Academii Nauk Ukrainy. Kyiv, 2006. No. 2 (14). Pp. 174-176. (Ukr)
Mazurenko, L.I., Vasyliv K.M., Dzhura O.V. Improved mathematical model of a three-winding induction machine. Tekhnichna Electrodynamika. 2023. No. 5. Pp. 28-36. DOI: https://doi.org/10.15407/techned2023.05.028. (Ukr)
Shykhnenko M.O., Yaras Y. Autonomous valve-inductor welding generators. International Scientific-Practical Conference of young scientists “Build-Master-Class-2024”. September 2024. Kyiv. Ukraine. (Ukr)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2024 L.I. Mazurenko, O.V. Dzhura, М.О. Shykhnenko, O.A. Bilyk