Keywords
stator core
pressing pressure
pressure stabilization
power accumulator
block conic springs
mechanical characteristics
How to Cite
Abstract
The results of an analytical review of modern methods and means of restoring and stabilizing the pressing pressure of the stator core of a powerful turbogenerator (TG) during operation are presented. The advantages and features of the use of power accumulators (PA) with blocks of disk springs for pressure stabilization, which are installed under the tightening nuts or instead of them on the threaded ends of the tightening prisms, are described. A number of TG and PA parameters that must be known to calculate the mechanical characteristics of the conic springs unit are outlined. It is shown that the optimal method of assembling disc springs into blocks in CA is combined (series-parallel). Based on the specified design parameters, the dependence of the force created by the disc spring and the spring block on the spring thickness was obtained. The dependence of the force of the spring block on the displacement of the pressure plate of the stator core for different values of the spring thickness was determined. The method of calculating the strength of disc springs is given
References
Zozulin Yu.V., Antonov O.Ie., Borychevskyi A.M., Bychik V.M., Kobzar K.O., Livshyts O.L., Rakogon V.G., Rogovyi I.Kh., Khaimovitch L.L., Cherednyk V.I. Creation of new types and modernization of existing turbine generators for thermal power stations. Kharkiv: Private company "Kolegium", 2011. 242 p. (Ukr)
Levitsky A.S., Fedorenko H.M., Gruboy O.P. Control of the state of powerful hydro- and turbogenerators with the help of capacitive meters of parameters of mechanical defects. Kyiv: Institute of Electrodynamics of the National Academy of Sciences of Ukraine, 2011. 242 p. (Ukr)
Levitsky A.S. Control of the forces of the clamping prisms of the stator core of powerful generators using capacitive sensors. Pratsi Instytutu Elektordynamiky Natsionaknoi Akademii Nauk Ukrainy. 2019. Issue 53. Pp. 80–89. (Ukr) DOI: https://doi.org/10.15407/publishing2019.53.080
Paspalovski Toni, Jovanovska Vangelica. Partial Replacement of the Active Steel on the Turbogenerator End Zone. Termotechnika. 2015. XLI, 1. Pp. 1–7. DOI: https://doi.org/10.5937/termoteh1501001P
Pat. 7.946,023 B2 United States. Int. Cl. H02K 15/06, H0 IF 3/04, G0IR 3I/28. Method and apparatus for meas-uring compression stator core / James Allan Cook (USA), David T. Allen (USA); Siemens Energy, Inc. (USA, Orlando). No. 11/285,834; declared 22.11.05; publ. 24.05.11.
Levitsky A.S., Zaitsev Ie.O., Panchik M.V., Sorokina N. L. Restoration of pressing pressure of the stator core of a powerful generator using hydraulic cylinders. Vidnovluvalna energenyka ta energiefektyvnist u XXI stolitti: materialy naukovo-praktychnoi konferentsiii (Kyiv, 19-20 May. 2022). К.: Interservis, 2022. Pp. 215–217. (Ukr)
United States Patent No.9,016,991 B2. Int. Cl. F16B 31/02, H02 K1/16, H02 K11/00, 3P 19/06, G01L 1/24, G01L 5/24, G01 D 5/353. Bolt tightener device for tightening a through-bolt in a generator core / Twerdochlib Michael (US), Edward David (US), Diatzikis Evangelos V. (US); Assignee Siemens Energy, Inc. (Orlando, FL, US) – Appl. No. 13/863,473; Date of Patent Apr. 28, 2015.
Ukraine pat. for a utility model No 66717, МПК H02K 1/16. The stator of an electric machine. Penskoi V. F., Zhukov A.U., Minko O.M., Kobzar K.O.; State Enterprise "Elektrovazhmach" (Kharkiv, Ukraine). No u 201109022; declared 19.07.2011, publ. 10.01.2012, Bul. No 1.
Ukraine pat. No 120795, МПК H02K 3/50, H02K 1/16, G01B 7/00 The power accumulator for stabilization of pressing pressure of the stator core of the turbogenerator / Levitsky A. S., Zaitsev Ie. O., Kobzar К. О. ; Institute of Electrodynamics of the National Academy of Sciences of Ukraine. No а 2018 03751; declared 06.04.2018, publ. 10.02.2020, Bul. No 3.
Machine parts. Calculation and design. Directory. Volume 2. Ed. N. S. Acherkan. M. "Machinostroenie". 1968. 408 p. (Rus).
Dominik Sebastian Leininger, Max Benedikt Geilen, Markus Klein, Matthias Oechsner. A New Method for the Calculation of Characteristics of Disc Springs with Trapezoidal Cross-Sections and Rounded Edges. Materials. 2022, 15(5): 1954. DOI: https://doi.org/10.3390/ma15051954
Max Benedikt Geilen, Marcus Klein, Matthias Oechsner. A Novel Algorithm for the Determination of Walker Damage in Loaded Disc Springs. Materials (Basel). 2020. 13(7):1661. DOI: https://doi.org/10.3390/ma13071661
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2023 А.S. Levitskyi, Ie.O. Zaitsev, N.L. Sorokina