Abstract
The paper is devoted to the study of the characteristics and operating modes of a brushless magneto-electric tachogenerator, which is implemented on the basis of a traditional radial electric machine with a slotless stator and permanent magnets on the rotor. Options for generating an DC output signal using diode and transistor rectifiers have been studied. The dependences of the average value of the output signal, the slope of the output signal, the coefficient of deviation of the characteristic from the specified value and the pulsation coefficient were obtained depending on the rotation speed of the rotor shaft. The influence of the capacitance of the filter capacitor on the magnitude of the output signal ripple amplitude has been studied.
References
Kumar, Ashish; Saraf, Harsh; Kumar, Ravi. Hardware design of closed loop four quadrant dc motor drive with regenerative braking. 2nd International Conference on Inventive Systems and Control (ICISC). IEEE, 2018. Pp. 287–292. DOI: https://doi.org/10.1109/ICISC.2018.8399080
Khudyaev A.A., Litvinenko D.G. Comparative assessment of the quality of iterative three-channel servo electric drives with standard settings. Bulletin of the National tech. University KhPI. Problems of automated electric drive. Theory and practice. Kharkov: NTU KhPI, 2010. No. 28. Pp. 186–191. (Rus)
Ye Zhengmao; Mohamadian Habib P. Comparisons of Two Feedback Servo Systems for Control Engineering Education: A Case Study on Student Performance of Speed Control Systems. ASEE Gulf-Southwest Annual Con-ference. The University of New Mexico: 2008.
Top A., Çakmak O., & Gökbulut M. Tachogenerator DC motor speed control with PID and fuzzy logic. Journal of Engineering and Technology. 2017. No 1(1). Pp. 24–31.
Handbook of Electrical Machines: 2 vols. T.2. Under general ed. I.P. Kopylova, B.K. Klokova. M.: Energoa-tomizdat, 1989. 688 p. (Rus)
Sekine, Hideomi, et al. A compensation method of ripple voltage on DC tachogenerator. Electrical engineering in Japan, 1992. 112.2. Pp. 124 -131. DOI: https://doi.org/10.1002/eej.4391120214
Web resource. URL: https://www.electromate.com/
Corbett A. E. An axial airgap brushless DC tachogenerator. IEE Colloquium on Instrumentation of Rotating Electrical Machines. IET, 1991. Pp. 3/1–3/3.
Brodovsky V.N., Karzhavov B.N., Rybkin Yu.P. Brushless DC tachogenerators. Moscow: Energoizdat, 1982. (Rus)
Lebedev N.I., Gandshu V.M., Belyaeva S.A., Yavdoshak Ya.I. Research of contactless tachogenerators for electric drives of machine tools and robots. Brushless electric motors with semiconductor devices. Leningrad: VNIIelektromash, 1985. Pp. 102–115. (Rus)
Kireyev V.G., Akinin K.P. Features of the development of slotless brushless magnetoelectric torque motors. Pratsi Instytutu Elektrodynamiky NAN Ukrainy. 2022. Issue 63. Pp. 31–39. DOI: https://doi.org/10.15407/publishing2022.63.03
Petukhov I.S., Kireev V.G., Akinin K.P., Lavrinenko V.A. Reducing the pulsation of the over-torque torque of a slotless torque motor with permanent magnets and a double-ball winding. Tekhnichna electrodynamika. 2024. No. 4. Pp. 57-62. DOI: https://doi.org/10.15407/techned2024.04.057 (Ukr)
Podoltsev O.D., Pavlov V.B., Zapadinchuk O.P. Analysis of the efficiency of electrical energy transmission in the drone-free charging system of an electric vehicle battery. Tekhnichna electrodynamika. 2021. Issue 4. Pp. 63–69. DOI: https://doi.org/10.15407/techned2021.04.063 (Ukr)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2024 K.P. Akinin, V.G. Kireyev, І.S. Petukhov, A.A. Filomenko